Introduction

This document gives step-by-step guidance on the configuration of the Agentic Commerce Protocol - Product Feed in Intershop Commerce Management (ICM).

References

• Concept - Agentic Commerce Protocol - Product Feed

• Cookbook - Agentic Commerce Protocol - Product Feed

Configuration Steps

The Agentic Commerce Protocol - Product Feed is part of the product data feeds available in Intershop Commerce Management. It can be configured in the channel.

To configure the Agentic Commerce Protocol - Product Feed, follow these steps:

1. Select the channel from the context selection box.

2. Select Catalogs | Product Data Feeds from the navigation bar.

   

3. The list of already configured data feeds is displayed.

   

4. Start configuring a new feed and enter the required data.

   

5. Switch to the Target tab to select the product feed type and enter the required data.

   

6. Select or enter the data in the General Feed Settings section.

   

   1. Enter the files name.

   2. Select the application.

   3. Select the locale.

      

   4. Select the currency.

      

   5. Select the compression level.

      

7. Enter the data in the Shop & Market Settings section.

   

8. Configure the settings in the Products section. Select the handling of incomplete products and the product image views and types.

   1. Choose whether incomplete product feed data is rejected.

   2. Select the required image_url of the feed.

   3. Optionally, select one or more additional_image_urls.

   

9. To schedule automatic feed generation, use the configuration in the Scheduling tab.

   

10. On the Products tab, select the products for which the feed is created.

    

Final Configuration Example

This shows an example of the Agentic Commerce Protocol - Product Feed configuration.

Error Messages

If configuration data is in the wrong format or is missing, the following error messages will appear, indicating that some of the data entered needs to be corrected:

If an error message “Attention: URL Rewriting is disabled for this channel” appears, URL rewriting can be enabled in the channel Preferences | SEO Settings:

Sharing the Generated Product Feed Data

Location of the Files

The location of the generated files depends on the syndication target property intershop.syndication.target.ChatGPTProductFeed.exportDirectory.

This property is usually defined in the syndication-targets.properties file.

The placeholder ${SITE} refers to the channel where the product feed was created in ICM.

The location for Agentic Commerce Protocol - Product Feed is below the static folders: ${SITE}/static/chatgpt/${SYNDICATION_ID},
where

• SITE - <the channel site name>/

• 1 or 2 - depends on the current active staging schema/synonym; always 1 if staging is not used

  • The active schema is automatically determined immediately before the feed is created.

• /static/chatgpt - fixed subfolder for all the Agentic Commerce Protocol - Product Feeds

• SYNDICATION_ID - the ChatGPTProductFeed name as entered in ICM

Example: sites_folder/TestEnterprise-TestSalesChannel-Site/1/static/chatgpt/ChatGPTProductFeed

Applying to Share the Product Feed

Merchants need to apply to be able to share product data via the Agentic Commerce Protocol - Product Feed using the ChatGPT registration form.